Healthcare (lst) panel radiators with wireless thermostat – compliant to HSE 43˚c standard and Ecodesign lot 20

For Offices, Homes, Apartments, Sheltered Housing, Assisted Living, Nurseries, School, Rest and Care Homes, Healthcare Buildings and Public Areas where potentially vulnerable people and children might be living, working or visiting.

Heat parade (electric) 1) radiant bar fire, 2) convector heater, 3) oil-filled radiator, 4) fan heater, 5) halogen heater.

Examples of battery packs

Better control saves energy, saves money

Department of Energy & Climate change suggest (2013) that a domestic energy bill is made up of 17% to hot water and 66% to domestic heating Managing and controlling your heating “Where you want it, when you want it” is the key to saving money.

RADIATOR KEY FEATURES:
Simply wire the heater to a fused spur / Cable Length 2m / Cable exit on the rear – hidden wiring / Fitting Kit Supplied / No need to to manually switch heaters “On” or “Off” when using controller.

WIRELESS CONTROLLER (TRANSMITTER) KEY FEATURES:
Keylock mode / Simple to Programme / Up to 6 temperature settings per day / 7 day clock/ Advance mode / Economy mode Holiday mode / Boost Mode / Inbuilt room temperature sensor / Frost protection / Powered by 2 x 1.5v Alkaline batteries The TX control unit sends a 433MHz radio signal to each “registered” heater within a radius of 30 metres. Each RX panel heater has an inbuilt receiver designed to respond to a signal from the WCT 100/RX.

To help preserve the environment, and as part of its sustainability policy, Ecolec offer a Do Not Scrap return-to-base full refit and refurbishment service.

A simple 3 point plan!
• Measure Room Sizes
• Calculate Heat Loss
• Select Radiator

 

SAFE TO TOUCH AT 43°C AS ADVISED BY THE HEALTH & SAFETY EXECUTIVE . TEMPERATURE RANGE: 43°C SUITABLE FOR BATHROOM USE

NO PLUMBING, NO GUARDS, NO PIPEWORK, EASY PLUG AND PLAY INSTALLATION.

Ecolec® radiators use Solid State Switching technology

We use Triacs (a semi-conductor device)

Long Life – Solid state switches have no moving parts. Therefore there is no mechanical wear and tear of the output contacts. Ideal for repetitive applications.
Quiet Operation – Solid state switching solutions make no acoustical noise when the output contacts change states. This is highly desirable in most domestic, commercial and medical applications.
Minimum Electrical Noise – Zero voltage turn-on and zero current turn-off allows for minimum electrical disturbances.
Fast Switching – Burst control can be easily achieved to provide accurate AC power control.

Ecolec Limited, Sharrocks Street, Wolverhampton WV1 3RP

Tel: 01902 457575 Fax: 01902 457797

Email: sales@ecolec.co.uk

Website: www.ecolec.co.uk